W-450 PINION PUSHER

t Use 1/2" impact wrench to efficiently remove
      pinion.

t  Eliminate damage to expensive pinions from
     beating them out.

t  Use on Rockwell XX145, XX160, SSHD, and
     SQ100

t   Use with maul to install pinion bearings.

t Use on Rockwell XX145, XX160, SSHD, and
      SQ100

t  Eliminate makeshift methods of holding pinion in
    case while completing pinion assembly.

t  Supplied with metric bolts to attach holder to
    case.

t  Eliminate makeshift methods of holding
     pinion/drive gear while installing or removing
     pinion nut.

t  Engage  pins with drive gear and bolt tool to
     case.  Use 1" impact wrench to remove or install
     pinion nut.

$149.00

G-257C  TAPERED BEARING CUP
                        INSTALLER

t Installs Aux. Front C/S cup into bore of
    main box.  Accommodates large
    (4301851) tapered bearing found in
    FRO and many other models.
t FRO 210 Series
t Insert on end of G-230 Bearing Driver
    (sold separately). 
t See G-247C for small tapered bearing
     installer.

AXLE SIDE BEARING PULLERS & DRIVERS
 

 W-400  
  EATON t 34DS,  38DS 
                     t 380DS, 381DS
                     t 402DS, 404DS

           ROCKWELL Model 8 RC20145
             
t  4 Tough jobs on several different
     models in one easy to carry kit.  The 
     Puller & Driver are cut back to back to
     remove & install both large & small
     bearings.
t  Puller makes quick easy work of
     removing bearings.
t  Eliminates time spent repairing
     damaged housings caused by using a
     torch to remove bearings.
t  No more carrying heavy assembly to
     press to install bearings.
t  Handy Organizer/Tote Tray included.

t  Use with W-400 Kit to remove and install side
     bearings on SQ100 and SQHD models.

t  Supplied with bolt that can be welded to W-
     400 tote tray so plug can be organized with 
     your existing W-400 kit.

t Everything you need to get the job done efficiently and safely
t Any of the 18 tools in this kit can be purchased separately

Tools Included:
t  G-10 Bearing Puller                                              t  G-70  Impact Puller 
t  G-28 Countershaft Pusher                                    t  G-111    Bearing Driver
t  G-29  Bearing Puller                                             t  G-113  Bearing Driver
t  G-35  Input Shaft Bearing Driver                             t  G-242    Output Shaft Bearing Driver
t  G-38  Input Shaft Bearing Puller                             t  G-247 Tapered Bearing Puller Collets
t  G-40  Aux. Section Hanger                                    t  G-247B  Tapered Bearing Cup Puller
t  G-50  C/S Rear Timing Block                                 t G-247C Tapered Bearing Cup Driver
t  G-51  C/S Front Timing Block                                t  G-250     Aux. C/S Retaining Tool (Pair)
t  G-58  Timing Block                                               t  G-259A  Rear Oil Seal Driver Adapter

K-9000 Rockwell Differential Kit

 t Everything you need to get the job done efficiently and safely
 t Any of the 4 tools in this kit can be purchased separately
 

Tools Included:
 t   W-450 Pinion Pusher                              t  W-451  Pinion Bearing Driver
 t   W-452 Pinion Holder                               t  W-453  Drive Gear Holder  
 

K-1000  FRO 210 SERIES KIT
 

t Everything you need to get the job done efficiently and safely
t Any of the 16 tools in this kit can be purchased separately
t Several tools in this kit will also work on most other Eaton Models
     (G-35, G-38, G-40, G-225, G-242,  G-250 & SP-450)

Tools Included:
 t G-35 Input Shaft Bearing Driver                              t G-250 Aux. Countershaft Retaining Tool
 t G-38 Input Shaft Bearing Puller                              t G-247 C/S Bearing Puller Aux.
 t G-40 Auxillary Section Hanger                               t G-247B Tapered Bearing Cup Puller
 t G-54 C/S Front & Rear Timing Block                      t G-247C Tapered Bearing Cup Installer
 t G-225 M/S & C/S Hook                                        t G-247D Metric Thread Adapter
 t G-230 C/S Front & Rear Bearing Driver                  t G-247E Mainshaft Timing Block
 t G-242 Output Shaft Bearing Driver                         t G-259A Rear Oil Seal Driver (Used with G-242)
 t G-246 C/S Bearing Puller Main Box                       t SP-450 Yoke & Flange Remover

K-6000  FSO 6406A/8406A SERIES KIT

 t Everything you need to get the job done efficiently and safely
 t Any of the 14 tools in this kit can be purchased separately

Tools Included:
t G-70 Impact Puller                                         t G-406 Input & Output Shaft
t G-116 Shift Tower Spring Installer                                   Oil Seal Driver
t G-117 Driving Mauls                                       t G-407 Front C/S Bearing
t G-200H Driving Handle                                                  Cover Plate Driver
t G-247A M/S Bearing Puller                            t G-410 C/S Front Bearing Puller
t G-250G Snap Ring Pliers                               t G-415 M/S & C/S Rear Brg Driver
t G-420 Input Shaft Bearing Driver                      t G-405 Input & Output Shaft                                    
t G-430 Input Shaft Bearing Puller
                Bearing Cup Driver

 

                              

G-200  BEARING, BUSHING, & OIL SEAL DRIVER SET

 t For use on most Eaton Transmissions
 t 9 Driving Rings with Interchangeable Handle (Five of the Driving Rings are Reversible)
 t Heat Treated Handle for Long Life
 t 20 Specific Driving Applications
 t Also useful on other applications where the sizes match bearing and seal diameters.    
     When driving bearings be sure contact is made with both inner and outer bearing races to
     avoid risk of severe damage to bearings.
 t Convenient Tote/Organizer that is compact enough to fit in large toolbox drawers

Driving Applications:

t 81505 Bearing                      t 81008 Bearing                       t 4304080 Bearing (FRO)
t 81052 Bearing                      t 81557 Bearing                       t 4302074 Tapered Bearing (FRO)
t   8879 Bearing                      t 16780 Bearing                       t 4301851 Tapered Bearing
t 14287 Bearing                      t 81547 Bearing                       t 4302074 Tapered Bearing Cup (FRO)
t 14366 Bearing                      t 81007 Bearing                       t 16556 Bushing
t 81548 Bearing                      t 81012 Bearing                       t 16516 Bushing
t 14337 Oil Seal                     t 15087 Oil Seal

W-340  AXLE REBUILD STAND

t Accommodates all Models.
t 360 Rotation with 4 positive locking
    positions.    
t Low 1/2" "H" Base Plate assures
    comfortable foot positioning.
t Most Heavy Duty Stand Available.

t Spanner type wrench with
     1/2" drive.

t Used on DODGE New
     Venture 4500
     Transmissions

$129.95

t Spanner type wrench with
     1/2" drive.

t Used on CHEVROLET
     New Venture
     4500 Transmissions.